1. Open the wheelchair: Open the wheelchair cushion, press down vertically to make the wheelchair fully open for normal use, and then lower the left and right pedals to the use position.
2. Push the wheelchair: The user sits steadily in the wheelchair, and then holds the push wheels to the left and right rear wheels with his hands, and at the same time pushes the wheelchair forward with a balanced force with both hands, and releases both hands. When the wheelchair slows down after a certain distance and needs to be pushed again, repeat the above steps.
3. Folding the wheelchair: First turn the pedals up to the vertical position, and then erect the wheelchair cushion from the middle by hand, so that the wheelchair is completely folded to a static state.
4. Telescopic support of the movable support: When the movable support needs to be telescoped, hold the foot support with your hand and turn it slightly to move the foot support up and down to the required position and lock it.
5. Braking: When the wheelchair is stopped, the user holds the left and right brake handles with both hands, and then simultaneously pushes the brake handles forward to the brake self-locking state, so that the rear wheels completely stop rotating to a stationary state.
6. Go up the steps: When the wheelchair goes up the steps, someone must push it from behind. When going up the steps, the pusher behind the wheelchair is stepped down with your feet to tilt the wheelchair backwards, so that the front wheels rise to the height of the steps, and then push forward a little bit, loose your feet, and push the wheelchair hard so that the rear wheels cross the steps. Continue driving.
7. Pedal height adjustment: First loosen the locking screw head at the bottom of the pedal bracket with a wrench counterclockwise, and then turn the pedal bracket down to pull it out. After adjusting the pedal to a suitable position for use, use a wrench to lock the bottom screw clockwise.
8. Adjustment of the movable lifting stand: when lifting the stand, you only need to rotate the stand up and pull it to the proper position; when lowering the stand, hold the control handle outside the stand with one hand and Push forward, then rotate the long tripod down to a suitable position, and release the control handle to return it to the self-locking state.
